BX306 GNSS Kit
With 2W/460Mhz Radio (RS460)

2W Radio option provides reliable data communications between 457 MHz and 467 MHz for mission-critical applications where a combination of stability, superior performance and long distance are required.  The BX306 Kit is ideal for surveying, AGVs, and agricultural applications.

BX306 Kit consists of BX306 Basic and 2W Radio Option. BX306 GNSS receiver is a cost-efficient GNSS RTK receiver for cm-level positioning and providing accurate raw measurement output, which can be integrated with autopilots and inertial navigation units. 

Features

  • Supports GPS L1/L2, GLONASS L1/L2, and BeiDou B1/B2

  • Supports 384 channels

  • Supports in-built 4GB memory, which makes data collection easy

  • Up to 20Hz RTK solution and raw data output

  • Pin-to-pin compatible with NovAtel OEM615

  • Log/command compatible with NovAtel protocol

  • Supports event mark and PPS

 
 

Specification

Signal Tracking                     

Single Antenna                      GPS L1/L2

                                               GLONASS L1/L2

                                               BeiDou B1/B2

GNSS Channels                      384

Positioning

Single Point Positioning Accuracy (RMS)

    -Horizontal                          1.5m

    -Vertical                               3.0m

RTK Positioning Accuracy (RMS)

    -Horizontal                          10mm+1ppm

    -Vertical                               15mm+1ppm

Observation

 

C/A Code (zenith direction)            10cm

P Code (zenith direction)                10cm

Carrier Phase (zenith direction)       1mm

Performance

 

Time to First Fix

       Cold Start                         <50s

       Warm Start                        <30s

Timing Accuracy (RMS)            20ns

Velocity Accuracy (RMS)          0.03m/s

Initialization (typical)               <10s

Initialization Reliability            <99.9%

     

     

Physical & Electrical          

 

Size                                                       46 x 71 x 12mm

Weight                                                 23g

Input Voltage                                       3.3V DC
Power Consumption(typical)              2.8 W

Active Antenna Input Impedance      50Ω

Antenna Connector                             MMCX female x1

Pin-to-Pin Compatible                         NovAtel 615

COM Baud Rate                                   Up to 921600 bps                              

Operating Temperature                      -40℃ ~ +85℃

Data 

 

Storage                                                  In-built 4gb memory

Correction                                             RTCM 2.x/3.x/CMR/CMR+

Output                                                  NMEA-0183; Tersus Binary Format

Max. Update Rate                                20Hz

Log & Command Compatible             NovAtel Protocol

Communication          

Serial Ports                                             LVTTL x2

USB Ports                                               USB device x1

CAN Ports                                              ISO/DIS 11898 x2 *

PPS Ports                                                LVTTL x1

Event Mark                                             LVTTL x2 *

Remarks:                                                 * This port's function is related to                                                                         firmware version. 

 

In the Box

BX306 GNSS Kit includes

  • 2 x BX306 RTK receiver

  • 2 x 20pin external cable

  • 2 x AX3702 GNSS antenna

  • 2 x 2W/460MHz radio

  • 1 x Bullet-DC to Alligator Clips

  • 1 x Bullet-DC to 2W-Radio-5pin cable with 2pin power & 6pin COM

  • 2 x 2pin power cable

  • 2 x UART to USB converter

  • 2 x TNC-J to SMA cable 3m (GNSS antenna cable)

  • 2 x 2W/460MHz radio antenna

  • 1 x USB to 2W-Radio-5pin cable with 2pin power & 6pin COM

  • 1 x carrying case

@ 2019 TECPHIL Geosolutions Co.

  • Grey Facebook Icon
  • Grey YouTube Icon